Corpus DIRECT 1/2 Suction Unit for 1-2 Dental Units
The Corpus Direct 1/2 is a compact semi-dry suction system designed specifically for one or two dental units, saving valuable space. Thanks to its advanced aluminium-zinc alloy motor, it runs with minimal noise and zero vibration, providing dentists with an ergonomic working environment during implant and surgical procedures.
The Corpus Vac Direct 1/2 is an innovative semi-wet suction system that saves space and has been designed with a perfect fit for one- or two-chair dental clinics. In dental practice — especially during surgical operations and situations requiring heavy fluid evacuation — it removes saliva and particles from the environment instantly, and thanks to its aluminium-zinc alloy motor body produced with high technology it has remarkable durability.
The unit's compressor turbine is likewise made from the same aluminium-zinc alloy and, thanks to the many radial blade structures inside it, generates exceptional torque and vacuum power as saliva is drawn in. Standing out with its ability to suction continuously all day long, this model works flawlessly even during long working hours thanks to its well-equipped electronic board (PCB) architecture with an integrated delay-setting system.
Its microswitch-based automatic start/stop function provides a very practical clinician experience, while the compact and ergonomic housing means it takes up no space even in small clinic rooms.
The outer surface, coated in electrostatic white powder paint, not only contributes to the clinic's aesthetics but also offers hygienic protection that is easy to clean for infection control. Despite its strong structure, it runs without vibration or judder, making it easier for the clinician to focus.
-
Supported unit capacity: 1 or 2 dental units
-
System type: Semi-wet suction system
-
Voltage options: 104 – 127 V or 208 – 254 V
-
Frequency and motor power: 50 Hz / 0.550 kW or 60 Hz / 0.620 kW
-
Motor type: Side channel blower (high-technology aluminium-zinc alloy)
-
Current consumption: 3 - 3.8 ampere
-
Motor capacity (air): 1,300 litres of air / minute
-
Motor speed: 2,800 revolutions / minute
-
Motor vacuum pressure: -110 mbar (+/- 10%)
-
Vacuum capacity (water): 10 - 12 litres H2O / minute
-
Inlet / outlet hose diameter: standard 25 mm / optional 30 mm
-
Operating principle: Continuous suction, PCB with delay-setting system
-
Open / closed type: Automatic with microswitch
-
Colour / paint type: 9016 white, electrostatic powder paint
-
Dimensions (H x W x D): 46 cm x 30 cm x 50 cm
-
Weight: approximately 20 kg