SUN III 23 lt Class B Dental Autoclave
It is a tabletop medical autoclave device with suitable capacity for busy clinics, fractionated pre-vacuum, steam generator, self-contained water tank, safety functions, Class B, and 23-liter volume.
SUN III 23 lt Class B Dental Autoclave
Produced by Mingtai company, whose expertise is only sterilization devices, SUN-III series autoclaves stand out with their advanced program features and safe sterilization process. It meets the sterilization needs of medium-sized clinics with its 23-liter volume capacity.
Equipped with an advanced 16-bit microprocessor. It is used for the sterilization of all kinds of medical instruments, including instruments used in dental and oral diseases (stomatology equipment), medical instruments, ophthalmology instruments, surgical and laboratory instruments. It is easy to use.
It is a 3-fraction vacuum autoclave compatible with new international EN13060 Class B norms.
It vacuums up to 0.9Bar (- 0.09Mpa). Residual moisture content is less than 0.2%.
Suitable for all kinds of packaged, unpackaged, solid, porous, or hollow dental and medical instruments.
Includes Bowie Dick test, Helix, and vacuum test procedures.
Provides efficient sterilization with a jet-type steam generator.
Thanks to the waste water tank alarm system, used water is prevented from entering the sterilization cycle.
Precise digital display and advanced automatic test system allow you to obtain operating data most accurately.
The chamber is made of stainless steel. (2.5 mm thickness, #304)
The newly designed water tank is on top of the device. Its lid can be easily opened and filled, easy to clean.
Double door locking system guarantees secure operation and safety.
You can record the sterilization process with the built-in mini printer.
It has a large, easy-to-read LCD screen.
A new type of steam generator produced by one-time pressing is used in Sun autoclaves. In this way, the steam generator provides a high level of sealing.
Sun autoclaves are equipped with a new patented imported door adjustment system to ensure door tightness.
New magnetic door sensor (hall sensor) guarantees that the door is completely closed without the risk of leakage or sliding in the lid.
| Sterilization level | European Class B standard |
| Sterilization temperature | 134℃/121℃ |
| Sterilization effect | Active HV, HBV, BSE and kills spores |
| Drying process | Strong vacuum drying, residual moisture <0.2% |
| Display | Large screen LCD |
| Test programs | Bowie&Dick steam penetration test, Vacuum test, Helix test |
| Safety | Safety valve, automatic controlled double pressure lock |
| Sterilization record | Optional USB socket and printer (internal or external) to record sterilization process |
| Water supply system | 3L distilled water tank, 3L waste water tank |
| Cleaning procedure | Automatically cleans hose interiors and steam generator |
| Instrument holder | Round loading rack with 3 trays |
Autoclaves must use distilled water as a working medium. Even purified water contains various minerals; evaporation at high temperatures causes calcification. Over time, limescale accumulation can cause steam leakage or narrowing of pipes, and adversely affect pressure and temperature sensors. While sterilizing hollow equipment, limescale can enter small pipes and bearings in a way that affects the performance of the instrument. This demonstrates the importance of using distilled water. It is recommended to use distilled water in clinics, hospitals, laboratories, and other situations, and these devices are the best way to produce distilled water. You just need to fill in normal tap water; then you can get high-quality distilled water. Remember, purified water is not distilled water!
It is recommended to use sterilization packages to store sterilized instruments for a long time and use them safely later. At this point, the package sealing device will be your biggest helper.
SUN Package Sealing Device is at your service with its high-quality stainless steel stylish body and easy-to-change blades.
This ergonomically designed, safety-insulated device is also very easy to use. When the device heats up, the side handle is lowered to seal the package and cut with the movable blade. The product has 5 cm, 7 cm, and 10 cm different width features to meet the sealing requirements of instruments of different sizes.
Medical packages consist of paper and polypropylene layers; the change in strip or text color indicates the end of the sterilization process. You can put instruments that need to be sterilized in sealed packages and store them for a long time.
| Voltage | AC 220V/110V ±10% |
| Frequency | 50/60Hz |
| Plug type | GB 3 line / EN 3 line / American 3 line |
| Maximum Hp | 2000VA |
| Chamber Volume | 23L |
| Load capacity | 5.5 kg instrument, 2.5 kg textile, 1.5 kg single piece |
| Class | European Class B standard |
| Sterilization Temperature | 134℃/121℃ |
| Internal dimensions | Φ249×450 mm |
| Net weight | 53 kg |
| External Dimensions | 480 x 630 x 420 mm |
| Packaging dimensions | 750 × 595 × 525 mm |
SUN Autoclave Sterilization Programs
| PROGRAM | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
| DEGREE | 134 ℃ | 121 ℃ | 134 ℃ | 121 ℃ | 134 ℃ | 121 ℃ | 121 ℃ |
| DETAIL | UNWRAPPED | UNWRAPPED | WRAPPED | WRAPPED | COTTON | COTTON | PLASTIC |
| Sterilization temperature | 134℃ | 121℃ | 134℃ | 121℃ | 134℃ | 121℃ | 121℃ |
| Sterilization pressure | 210 kpa | 110 kpa | 210 kpa | 110 kpa | 210 kpa | 110 kpa | 110 kpa |
| Vacuum counts | 1 | 1 | 3 | 3 | 3 | 3 | 1 |
| Sterilization time | 4 min | 20 min | 4 min | 20 min | 20 min | 20 min | 20 min |
| Drying time | 12 min | 12 min | 18 min | 18 min | 20 min | 20 min | 18 min |
| Program duration | 30-35 min | 40-45 min | 50-55 min | 55-60 min | 50-55 min | 55-60 min | 40-50 min |
Package Content
Autoclave Device
1x holder rack
3x metal trays
1x drain hose
1x ring gasket
1x power cord
1x manual holder
2x fuses
1x user manual